Mark Enharmonic Pitches

Version 02.05.00
Added 01 Aug 2005 (last updated 26 Apr 2016)

For use with Sibelius 3.x, Sibelius 4, Sibelius 4.1, Sibelius 5, Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

Mark Enharmonic Pitches allows you to specify a color for individual pitches, using separate colors for enharmonically equivalent pitches (such as F#/Gb). You can use it to apply a \\\"spectrum\\\" of unique colors for each pitch, or use it for proofreading and analysis.

Double sharps and flats are colored the same as an enharmonic pitch (Gx -> A) and quartertones are colored as the nearest flat or sharp. You can, however, select a color from the double/quartertone lists, and all double accidentals or quartertones will get the same color, regardless of pitch.

This plug-in can be useful for locating any \\\'mispelled\\\' accidentals, such as F# where you might expect Gb. The Sibelius filters do not allow you to distinguish between enharmonically equivalent pitches, but this plug-in will do that.

It does not explicitly generate a log file showing marked objects, but it allows you to call the Locate Colored Objects plug-in to do so. (If that option is chosen, a recent version of Located Colored Objects must be downloaded as well).

Updated 26 April 2016 to allow colors to be added to individual notes.

Plug-in written by Bob Zawalich.

Move Pitches to Transposed Mid-Line

Version 02.01.65
Added 01 Aug 2005 (last updated 03 Mar 2024)

For use with Sibelius 3.x, Sibelius 4, Sibelius 4.1, Sibelius 5, Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

__This plug-in transposes music on the selected staff or staves to the center staff line and can change the style of the notehead (e.g. to create slashes). It puts the notes in the right place for transposed instruments. __Fixed in v 1.56: __Corrected to handle some enharmonic misspellings. Added the ability to move either type of slashed noteheads at the same time. __Fixed in v1.50: __Now respects partially selected bars, rather than processing them as if fully selected __Fixed in v1.20: __You can now specify any supported notehead to be the only notehead moved. Previously, only normal noteheads could be specified. __Fixed in v1.15.0: __instrument handling changed so that new instruments are dealt with automatically (3.1 instruments are handled properly) __transposition changes handled __Updated 21 Feb 2009 version 2.0: __New option to move to center line of concert score, rather than transposed score __Updated 2 April 2009 for internal code cleanup __Updated 17 October 2022. Version 02.01.00. Major code restructuring to allow plugin to be called by RunPluginEntry_cu. Added New Macro/Plugin button to generate and store RunPluginEntry_cu command lines. __Updated 24 January 2024. Version 02.01.40. Added notehead styles 27 (Large stemless slash) and 28 (Large slash with stem). Internal changes to allow better calling from other plugins using New macro/plugin. __Updated 03 March 2024. Version 02.01.65. Updated to support New Plugin button. Needs updated Execute Commands, cmdutils, and New Plugin Lib.

Plug-in written by Bob Zawalich.

Split Bar Rests

Version 01.30.00
Added 01 Aug 2005 (last updated 26 Jul 2020)

For use with Sibelius 3.x, Sibelius 4, Sibelius 4.1, Sibelius 5, Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

This plug-in converts any bar rests in the selection to rests of shorter durations. The duration of the smaller rests will be one per beat, with the beat length determined by the time signature. This can be handy if you want to see the contents of irregular bars, or for other obscure reasons.

New in v1.04:

  • The plug-in can now split bar rests into other than beat-sized units. One can now spcify the size of the rest to use as well as how to dispose of any excess.

Updated November 15, 2007:

Now properly splits all bars rests if rests are present in more than one voice

Updated June 7, 2008. Version 1.10. New option to split rests only in irregular bars.

Updated June 24, 2008. Version 1.15. If a bar is too small for a single rest of the requested size, the largest possible rest is now written, rather than skipping the bar.

Updated 2 April 2009 for internal code cleanup

Updated 28 February 2010 to optionally select entire score if there is no passage selection.

Updated 25 July 2020. Version 01.30.00. Added option to replace a bar rest with a normal rest of the same duration where possible. It will try undotted through triple dotted durations to try to match the bar size. If there is not a single-note match, the plugin will use the closest-sized single note it could find, and fill the remainder of the bar with whatever rests Sibelius finds appropriate.

Plug-in written by Bob Zawalich.

Multirest Line

Added 01 Aug 2005 (last updated 17 Jun 2015)

For use with Sibelius 3.x, Sibelius 4, Sibelius 4.1, Sibelius 5, Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

This plug-in allows you to replace a selected multirest with a line, e.g. a wavy line (as used in percussion parts to indicate that the player should simply play for that number of bars).

To use the plug-in, first set the multirest display to Blank in House Style > Engraving Rules > Bar Rests, then select the multirest in which you want to use a line, and run the plug-in.

Updated 20 Mar 2009 to run in Sibelius 5

Updated 2 April 2009 for internal code cleanup

Plug-in written by Peter Hayter and Bob Zawalich.

Count Notes

Version 01.05.00
Added 01 Aug 2005 (last updated 17 Jun 2015)

For use with Sibelius 3.x, Sibelius 4, Sibelius 4.1, Sibelius 5, Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

Count Notes counts the number and type of notes and rests in a selection, and list counts by bar and in total. It will also display the durations of the counted notes.

Updated 29 January 2007: Now has an option to display the number of notes or chords on an instrument by instrument basis.

Plug-in written by Bob Zawalich.

Fill With Slurs

Added 14 Sep 2005 (last updated 22 Mar 2017)

For use with Sibelius 4, Sibelius 4.1, Sibelius 5, Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

This plug-in allows you to quickly fill string passages with legato slurs. Create a multiple selection consisting of all notes where a slur should start. The plug-in will insert for each selected note a slur which ends on the note preceding the next selected note.

The plug-in is prepared to work properly with selections containing notes from different voices or instruments.

Plug-in written by Hans-Christoph Wirth.

Hide Duplicate Rests

Version 01.18.00
Added 21 Dec 2005 (last updated 29 May 2018)

For use with Sibelius 4.1, Sibelius 5, Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

This plug-in hides (but does not delete) rests that duplicate a rest (of the same position and duration) in another voice. It requires Sibelius 4.1 or later.

Updated 2 November 2009 to allow dialog to be hidden and results reporting to be optional

.

Updated 9 August 2011 for Sib 7 dialog control changes

Updated 28 May 2018. Fixed some Sib 7 memory issues.

Plug-in written by Bob Zawalich.

Hide Rests in Voice

Version 02.03.00
Added 21 Dec 2005 (last updated 29 Mar 2021)

For use with Sibelius 4.1, Sibelius 5, Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

This plug-in hides (but does not delete) selected rests in any chosen voice(s). It requires Sibelius 4.1 or later.

Updated 2 December 2011 to select hidden or shown rests (in Sib 5 or later) so they can easily be deleted if desired.

Updated 29 March 2021. Version 02.03.00.

Changes for use in commands plus speedup for large scores. You can now hide the dialog after the first time in a session, and the results of the hide will only be shown if you check a checkbox, and they are traces rather than message boxes. The progress bar is also removed.

Plug-in written by Bob Zawalich.

Lower & Raise Pitch Chromatically

Version 01.51.00
Added 24 Apr 2006 (last updated 17 Jul 2017)

For use with Sibelius 4, Sibelius 4.1, Sibelius 5, Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

Raise Chromatic Pitches raises the pitch of any selected notes by 1 half-step (semitone). Lower Chromatic Pitches lowers the pitch of any selected notes by 1 half-step. The note spelling (such as C# vs. Db) is determined by Sibelius. It should be comparable to what you would get if you entered the same pitch on a MIDI keyboard.

These are intended as a chromatic replacement for Up and Down Arrow, which move pitches diatonically. Typically, one would assign each plug-in to a shortcut key so it could be run with a single keystroke. Please be aware that if you assign shortcuts to plug-ins and download more plug-ins, the shortcuts will shift to different plug-ins and you will need to reset them.(Edit - this has been fixed in the most recent update when run in Sibelius 5.2)

Warning: unlike Up and Down Arrow, these plug-ins cannot move individual notes within chords. If you select any notes within a chord, all the notes in the chord will be moved! (Edit - this has been fixed in the most recent update when run in Sibelius 5.2)

Quartertones will be moved to their closest half-step (semitone) in the desired direction. At that point running the plug-in again will move the notes by a half-step (semitone).

Articulations and Live Playback data are retained in the moved notes.

Updated October 31 2008. If these plugins are run in Sibelius 5.2 or later, most of the limitations are removed. Individual notes within a chord can now be moved, and the problem with plugin shortcuts instability was fixed in Sibelius version 5.2.

Updated 17 July 2017 to support Magnetic Glisses in Sibelius 8.6 and later. Note however that these plugins should not be needed in Sibelius 7.5 and later, since chromatic transposition is now supported using the Shift PgUp/PgDn keys.

Plug-in written by Bob Zawalich.

Respell For Wrong Clef

Version 02.00.00
Added 24 Jul 2006 (last updated 17 Jun 2015)

For use with Sibelius 4, Sibelius 4.1, Sibelius 5, Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

This plug-in might be very useful if needed. It can help e.g., after Photoscore or some other converter misreads a clef, but reads the notes in the correct location (so Sibelius will interpret them incorrectly). It lets you specify the wrong clef and the right clef, and then transposes the notes appropriately.

The plug-in will now handle alto, tenor, and French violin clefs, in addition to bass and treble.

Cautionary accidentals will be lost, and in some keys this can result in incorrect accidentals after transposition. Users should proofread accidentals carefully.

Plug-in written by Bob Zawalich.

Combine Rests Empty Voices

Version 01.00.00
Added 30 Aug 2006 (last updated 17 Jun 2015)

For use with Sibelius 4.1, Sibelius 5, Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

Combine Rests Empty Voices combines rests in a voice that contains only rests. It creates the largest single rest possible. It also hides the rests in empty voices for all voices later than the first voice containing notes or rests.

>p>Updated 21 June 2010. For Sib 5 or later, the plugin will now produce bar rests when possible, rather than just large rests.

Plug-in written by Bob Zawalich.

Find Irregular And Misfilled Bars

Version 01.08.00
Added 22 Apr 2007 (last updated 07 Mar 2014)

For use with Sibelius 4, Sibelius 4.1, Sibelius 5, Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

This plug-in displays (in the plug-in trace window) any bars whose length and time signature do not match (irregular bars), and also any misfiled bars, which are bars that have missing rests, so that the sum of the lengths of the notes and rests (in each voice) do not match the length of the bar.

Misfilled bars can come from deleting rests, or when using scores generated by an errant plug-in or file converter.

Updated 2 May 2007: the plug-in now handles grace notes and notes within tuplets.

Updated 21 Feb 2013: Plugin now treats completely empty bars (no notes, rests, tuplets or bar rests in any voice as misfilled. It also handles misfilled tuplets better.

Plug-in written by Bob Zawalich.

Add Bar Rests In Empty Voices

Version 01.05.00
Added 05 Oct 2007 (last updated 15 Mar 2020)

For use with Sibelius 5, Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

Adds bar rests to chosen empty voices in selected bars (empty voices contain neither notes, rests, nor tuplets).

Updated 21 March 2010 to allow result display to be turned off.

Updated 9 August 2011 for Sib 7 dialog control changes

Updated 22 Feb 2020. Version 01.04.00. Handle completely empty bars when there is a passage selection.

Updated 14 March 2020. Version 01.05.00. Changed to handle discontiguous passage selection (a selection where some staves are excluded from the middle of the selection).

Plug-in written by Bob Zawalich.

Replace Rests With Bar Rests

Version 01.01.00
Added 06 Oct 2007 (last updated 22 Feb 2020)

For use with Sibelius 5, Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

Adds bar rests to voices in selected bars which contain rests, but neither notes, nor tuplets. Essentially replaces multiple rests with a bar rest as appropriate. Optionally skips bars of small duration (user can select the minimum duration).

Updated 22 Feb 2020. Version 01.01.00. Added more internal options for deciding the state of the rests in a bar.

Plug-in written by Bob Zawalich.

Scordatura

Version 01.54.00
Added 03 Mar 2008 (last updated 27 Jul 2023)

For use with Sibelius 5, Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

__This plug-in creates a scordatura staff for a stringed instrument in an altered tuning. Effectively it maps pitches so that they appear as if the notes were in standard tuning. __More specifically, it maps a [string, position] value from an altered tuning to the note that represents the same [string, position] value in standard tuning. Example: D2 on the low D string on a DADGAD tuned guitar is string 6 fret 0. In standard tuning, string 6 fret 0 is E2. So the plugin will rewrite the note D2 [in a notation staff] to be E2. __A scordatura staff will not play back the way you might like it to. __Check Google for scordatura if you are not clear what that means. If you are not clear on whether you want to use this you should probably not. __WARNING: this plugin will completely rewrite the selected staves. Save and maybe make a copy of your score before running. Make a copy of the original notation staff, and run the plugin on that copy. __You must specify the standard tuning and altered tuning used, in the form Sibelius uses for editing staff types. __There are lists of common instruments in the dialog, and if what you want is not in the list, find something close and modify it. Be careful to get the octaves correct. One other way to get the pitches for strings is to enter the notes for the open strings in a notation staff, then select each note and look for the name in the Notes pane of the Properties Window. __See Help for more information, including a discussion of the ambiguity of scordatura. __Updated 27 Feb 2009 to replace .plg file with .zip file __Updated 28 May 2018. Fixed message typo. __Updated 20 July 2018 Version 1.52.00. Improved error handling for dialog input. Added Cajun Fiddle tuning. __Updated 21 July 2018 Version 01.53.00. Removed unintended debug tracing. __Updated 27 July 2023. Version 01.54.00. Pitch names must now be in UPPER CASE. Flat accidentals work.

Plug-in written by Bob Zawalich.

Replace Deleted Rests

Version 01.08.00
Added 20 Apr 2008 (last updated 25 Feb 2016)

For use with Sibelius 5, Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

Looks for places where rests have been deleted rather than hidden, and will add rests back. By default it will hide the added rests.

It can also trace the locations of deleted rests

Updated 24 Feb 2016 to prevent unwanted duplication of non-note objects.

Plug-in written by Bob Zawalich.

Add Pipe Ornaments

Version 01.40.00
Added 11 Jun 2008 (last updated 07 Mar 2014)

For use with Sibelius 5, Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

Add bagpipe grace note ornaments before a selected note. Choose a named ornament from a list (Doublings, Embellishments, Piobaireachd, Grace Notes, Custom) or customize your own ornaments. Customized ornaments are saved across Sibelius sessions.

Updated June 17, 2008 to fix problems when the \\\\\\\\\\\\\\\"do not show dialog\\\\\\\\\\\\\\\" button is active

Updated August 5, 2008 to make dialog come up initially by default

Updated February 2, 2009 to add explanation for editing custom entries.

Updated 31 December 2010 to match changes made in the Bagpipes suite

Plug-in written by Bob Zawalich.

Arpeggiate Chords

Version 01.06.00
Added 10 Aug 2008 (last updated 15 Jul 2017)

For use with Sibelius 5, Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

Writes out the pitches of notated chords (not chord symbols or diagrams) as separate notes so they can be clicked on and heard individually. It will generate a new instrument at the bottom of the score, and arpeggiate the notes of chords in the first selected staff.

*** Notes in tuplets and grace notes will not be arpeggiated.

Notes in different voices playing concurrently will be treated as part of the chord to be arpeggiated.

Rests can be hidden in the output instrument.

The arpeggiated notes will play at the same duration as the original chord; in some cases this will require the arpeggio to be placed in a tuplet. If this happens, all notes in the chord will be made into a single voice (otherwise the original voice is maintained).

Updated 15 July 2017 to handle nagnetic glisses in Sib 8.6 and later.

Plug-in written by Bob Zawalich.

Add Slash Noteheads for Parts for Sibelius 6

Version 02.30.00
Added 06 Aug 2009 (last updated 07 Mar 2014)

For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

This is an updated version of the plug-in supplied with Sibelius 5. While its original purpose (adjusting slash noteheads that transposed) is obsolete in Sibelius 6, the plugin has other uses as well. This version correctly handles slash notes for transposing instruments (which the version shipping with Sibelius 5 does not do).

Updated 8 August 2008 to restore transposing to noteheads other than slash noteheads, to make the behavior the same as in Sibelius 5.

Plug-in written by Bob Zawalich.

Fill Selection With Slash Notes

Version 01.26.50
Added 15 Aug 2009 (last updated 24 Jan 2024)

For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

__Adds notes in a chosen voice to the middle staff line in selected bars (even if they are empty). Notes are normally added in voice 1; change this if the bars contain voice 1 notes. __Only type 3 and 4 (slash) noteheads will stay on the middle line in parts for transposing instruments, though other noteheads may be added. __Added notes can be shown only in the score or the part, be hidden, or be cue-sized. __Updated 11 October 2009 to handle instruments with different clefs in concert and transposing scores. (Needs Sib 6.1 for this to work). __Updated 23 February 2018. Added option to hide existing music in selection before adding slash notes. Changed default voice for slashes to be the first voice in the selection with no notes, to avoid unintentional overwriting. Added warning when there are selected notes in the same voice as the slashes to be added. Added slashes are now selected at the end of the plugin. __Updated 9 February 2019. Version 01.20.00. Added notehead styles 27 and 28 to the list of available noteheads. __Updated 20 February 2019. Changed mapping of notehead names and notehead numbers to be able to handle earlier scores and templates that used different numbers for built in notehead styles. __Updated 29 February 2020. Version 01.23.00. Added option to fill selection with rests rather than notes, and an option to skip bars that contained music in the voice in which notes or rests are added. An option to overwrite music in such bars was formalized, and it will delete the existing music before adding notes or rests to make the result consistent. __Updated 28 March 2021. Version 01.25.00. __Mostly internal changes for being called from Drum Cues. The list of notehead styles available for slash notes now includes all the notehead styles defined in the score, including custom noteheads. This allows you to create and use custom playable slash noteheads, should you choose to do so. __Updated 24 January 2024. Version 01.26.50. New options to follow rhythm of notes in voice are available in the durations list. New options to hide existing staff text, remove articulations, and put added notes stems up. Requires most recent Move To Transposed Mid Line plugin, at least02.01.40, to activate new options.

Plug-in written by Bob Zawalich.

Slash Notes At Midline

Version 02.21.00
Added 27 Oct 2009 (last updated 07 Mar 2014)

For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

Takes existing notes or chords and turns them into a single note at the middle line of the staff. It determines the pitch by looking at the clef in the non-transposed score.

It can move or create a number of notehead styles, but is intended for use with slash noteheads.

It allows you to turn off the display of the dialog, and will save most of its settings across Sibelius sessions.

It is an excellent companion to the Fill Selection With Slash Notes plugin.

Plug-in written by Bob Zawalich.

Pitch Counting

Added 12 Jan 2010 (last updated 07 Mar 2014)

For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

This plug-in counts the number of each individual pitch in a selection. It is first displayed with octave numbers and then by pitch class. (One note on this: In order for a tied pitch to be counted, it must be selected through the end of the tie.)

Plug-in written by Chris Shortway and Dr Lawrence Fritts.

Consolidate Ossia Staves

Version 01.12.00
Added 22 Jan 2010 (last updated 22 Feb 2020)

For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

Looks for multiple ossia staves above or below a staff and copies the contents of the ossias into a single staff if possible. It then deletes any empty ossia staves.

Updated 9 April 2013 to fix a crashing bug and to handle empty ossias better. Also added dialog to allow tracing without consolidating.

Updated 4 February 2017 to again deal with empty ossias. Now empty bars (those with bar rests only) will always be hidden, and if a combined ossia staff is completely empty it will be deleted. This was always the intended design, but it was not completely implemented before.

Updated 13 May 2018. Fixed some bugs involving empty ossias. Also added option, on by default, to convert ossia bars that contain only rests to have bar rests, which allows these bars to be consolidated.

Plug-in written by Bob Zawalich.

String Harmonics

Version 01.09.00
Added 18 Feb 2010 (last updated 21 Apr 2021)

For use with Sibelius 5, Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

Adds diamond-shaped notes above each single notes that has a normal notehead to notate string harmonics. There is a choice of which harmonic to notate, and an option to call the Harmonics Playback plugin to set up playback for these notes.

Updated 27 December 2010. If run without running the Harmonics Playback option, both the original note and the diamond notes are now silenced (since neither is the actual sounding pitch).

Updated 3 November 2018. Version 01.06.00. Added ability to not silence notes, which is useful for Note Performer, which cam properly play such dyads as harmonics.

Updated 14 March 2019. Version 01.08.00. Added 1/6 Harmonics, which are are not supported in Harmonics Playback, but which Note Performer can play.

Updated 21 April 2021. Version 01.09.00. Can now hide dialog and outside plugins can force plugin to run without showing a dialog.

Plug-in written by Bob Zawalich.

Remove Previous Ties and Remove Final Tied Notes

Version 01.06.00
Added 23 Feb 2010 (last updated 07 Mar 2014)

For use with Sibelius 5, Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

These plugins offer different ways of dealing with notes tied across a barline after using the Sibelius 6 R (Repeat) command.

Given a single selected note or chord that is tied to:

Remove Previous Ties removes ties from the previous note or chord in the same voice, if any, and leaves the note or chord following the barline selected.

Remove Final Tied Notes deletes the note or chord after the barline, removes the tie from the previous note or chord, and selects the previous note or chord

In both cases, the final note is selected and is ready for further note input, so if you assign the plugin to a shortcut (I found shift-R to be handy), you can remove the tie or tied note with one keystroke and continue inputting notes without having to reselect a note.

Either plugin may be used; your workflow can determine which method you prefer.

Plug-in written by Bob Zawalich.

Simplify Tied-To Notes

Version 01.14.00
Added 30 Mar 2010 (last updated 28 Feb 2022)

For use with Sibelius 5, Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

**** Selects notes that are tied to: notes that are immediately preceded by a note of the same pitch, in the same voice, with a tie, and removes any articulations and cautionary accidentals on these notes. **** Notes tied to from different voices or notes tied to but separated by other notes, will not be detected or processed. **** Updated 15 August 2011 to remove brackets accidentals as well as cautionaries. **** Updated 18 January 2012 to remove articulations in chords only if all the notes are tied to. **** Updated 9 May 2016. Reworked the way tied to notes are calculated for better results and faster execution. **** Updated 29 July 2017 Removed debug traces which slowed it down greatly **** Updated 28 February 2022. Version 01.14.00. Removed respositioning to start of select at end, and changed result notification from a message box to a trace.

Plug-in written by Bob Zawalich.

Delete Music Only

Version 01.01.00
Added 26 Apr 2010 (last updated 21 Feb 2020)

For use with Sibelius 5, Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

Deletes all notes, tuplets and slurs in any fully selected bars, replacing them with a bar rest, but leaving any text attached to the bars.

Note that if there are lyrics attached to the resulting bar rest, they cannot be dragged. You need to have notes or rests in a bar for lyrics to be moveable.

Updated 21 March 2015 to rename the plugin which was formerly called Delete Notes Only, which was misleading.

Plug-in written by Bob Zawalich.

Delete Rests Empty Voices

Version 02.01.00
Added 21 Jun 2010 (last updated 07 Mar 2014)

For use with Sibelius 5, Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

Eliminates the rests in all empty voices, unless all the voices in the bar are empty. In that case, any rests in voice 1 will be consolidated into a bar rest, and rests in other voices will be deleted.

Plug-in written by Bob Zawalich.

Use Shape Notes for Accidentals

Added 23 Sep 2010 (last updated 07 Mar 2014)

For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

Michael Israelian is a piano teacher in a musical college, and he says:

"During seven years of my work I found that many of my students encountered difficulties with sight-reading. About a year ago, after thinking hard over the problem, it dawned on me that it would be much easier to achieve good sight-reading using shaped noteheads instead of accidentals. I experimented with my students using my own system of five shape notes and the results exceeded all my expectations. Now it took considerably less practicing to attain good results than it took when using usual notation. I use five notehead shapes and no accidentals at all. Sharp notes are represented by a triangle, flats by an inverted triangle, double sharps a cross (ornate), double flats a diamond, and naturals a normal notehead.

"Though it takes a day or two for experienced musicians to get relaxed about the accidentals and use this system, the advantages of using shapes are obvious. First of all, the score looks clearer without accidentals. Secondly, each chord or passage obtains its unique appearance now, and you can remember them photographically just like a word or a phrase in a text. You don't have to calculate during sight-reading, i.e. to keep in mind the Key Signature and the previous accidentals in the bar. The chord (or passage) is written just is it must sound.

"Let's take the diatonic triad C-E-G for example. In C major key it will represent the chord C. In D major key it will be C#m-5. In A major it will be C#m and so on. Now imagine that this triad is somewhere at the end of a bar and there are some accidentals in the beginning of the bar and you will get some more combinations. Using the shape note system every different chord will look different.

"This plug-in hides the accidentals to retain the correct playback, and changes the shapes of the notes correspondingly. It can't deal with quarter tones, but I think that's not a problem as long as the piano is considered. As for me, I use this system in playing the guitar and the recorder as well.

"After transposing or adding notes to the score you will have to re-run this plug-in, as the shapes may not correspond to the accidentals."

Plug-in written by Michael Israelian.

String Harmonics Sounding Pitch

Version 01.63.00
Added 28 Dec 2010 (last updated 21 Apr 2021)

For use with Sibelius 5, Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

Adds a bracketed, stemless, cue-sized sounding pitch note to selected chords that already have a regular notehead and a diamond-head note, indicating string harmonics.

The sounding notes are in an unused voice of the bar containing the chords. If there are not enough available voices, sounding pitches will not be added to those bars.

The sounding notes can playback or be silenced.

You are advised to run the plugin String Harmonics first, to add the diamond noteheads this plugin looks for.

Updated 29 April 2012 to fix problem with stemless notes in non-English versions.

Updated 3 November 2018. Version 01.50.00. Added ability to silence original notes and to make the sounding note hidden, unbracketed, hidden, and or diamond shaped. A diamond-shaped note at sounding pitch will produce a harmonic timbre with some sound libraries, and can be preferable to using Playback Harmonics, especially if the sounding note is hidden. This is a departure from the original use of the plugin, but this seemed a good place to put these features.

Updated 03/14/2019. Version 01.62.00. Added support for 1/6 harmonics (diamond note a minor 3rd above the primary note). Also added code to transpose sounding notes with 5 or more ledger lines down an octave, adding an 8va line to the note.

Updated 21 April 2021. Version 01.63.00. Can now hide dialog and outside plugins can force plugin to run without showing a dialog.

Plug-in written by Bob Zawalich.

Add Articulations to Notes

Version 01.60.00
Added 01 Apr 2011 (last updated 14 Jul 2021)

For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

This plugin lets you quickly add or correct articulations applied to selected notes. It has a keypad, and you can assign different articulations to the keys.

It was designed to easily edit upbow and downbow articulations, but it can have more general applications. A PDF document describing its use is included in the zip file.

Updated 24 April 2011 to fix mismapping of some keys.

Updated 30 March 2012. New code for version 7.12 or later fixes Sib 7 problems of being unable to type in keypad after using the mouse, and typing C will close the plugin.

Updated 1 June 2012 Fix problem with typing C returning False

Updated 14 June 2012 to fix multiple keystroke bug in Sib 7. Version 01.48.00.

Updated 20 Feb 2020, version 01.48.00, to fix version number.

Updated 29 May 2021, version 01.49.00. disabled unreliable keyboard input to screen keypad in Sib 7 and later. the keypad can still be used with the mouse.

Updated 14 July 2021. Version 01.60.00. Change interface in Sib 7 or later to collect input in a visible edit box with an Enter key. This will make input more reliable, if less convenient. You may type multiple characters, but you must press Enter to apply the text in the edit box to the selected notes. You can also use the mouse on the keypad buttons, or in Windows only hold down the Alt key and press the key numbers.

Plug-in written by Bob Zawalich.

LV Fake

Version 01.04.00
Added 30 May 2011 (last updated 15 Mar 2020)

For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

This plugin simulates L.V (laisser vibrer/let vibrate) ties by turning a note into a triplet with 2/3 of the duration tied to the remaining 1/3. The final note and triplet bracket are hidden, so it appears as if the note original duration is tied to nothing.

This automates a manual process described by Jay Vilnai.

The plugin normally skips tied notes, but there is an option to process only notes with a dangling tie, replacing such notes with a tied triplet.

Updated 1 May 2018 to allow it to hide notes correctly when run in a part.

Updated 15 March 2020. Articulations from the original note/chord are now transferred to the first new note/chord.

Plug-in written by Bob Zawalich.

Unarpeggiate

Version 01.04.00
Added 11 Sep 2011 (last updated 07 Mar 2014)

For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

This plugin will create a single chord containing all the pitches from the notes in the selection with no duplicates. It will place the generated chord in the clipboard so it can be pasted into a score.

If the duration of the chord is chosen to be the sum of the durations of the selected notes, the duration will be limited to the size of a bar.

It can optionally add a chord symbol, derived from the selected pitches, above the chord or the first selected note.

This plugin is dedicated to the memory of Ian Cugley.

Plug-in written by Bob Zawalich.

Tie Common Notes

Version 01.06.00
Added 27 Sep 2011 (last updated 07 Mar 2014)

For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

Adds ties to common notes in a passage (box) selection. Common notes are adjacent notes in the same voice with the same pitch.

Updated 27 September 2011 to add warning to be sure that both the note that starts the tie and the note tied to are included in the selection.

Plug-in written by Bob Zawalich.

Remove Named Noteheads

Version 01.05.00
Added 10 Jan 2012 (last updated 22 Nov 2016)

For use with Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

This plugin make a copy of a score that uses noteheads generated by the Add Note Names to Noteheads plugin, and strips out the notehead definitions. This will allow you to use the Add Notehead Names Graphics plugin in Sibelius 7 to created named noteheads using graphics-based symbols that are opaque, so the staff line does not show through the notehead.

If the old notehead definitions are in the score, Add Notehead Names Graphics will use those, rather than generating its own definitions, and the staff lines will still show through.

This is a hack, and though it will work, the author apologizes for not having a better solution.

Updated 22 November 2016. Added ability to also remove Colored Notehead Styles.

Plug-in written by Bob Zawalich.

Transpose By Interval

Version 01.10.00
Added 29 Jun 2012 (last updated 30 Jun 2021)

For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

Transposes selected notes and chord symbols by interval, allowing more intervals that the Sibelius Transpose function, including diminished 2nds, 3rds, 6ths, and 7ths. Some combinations, such as Major 5ths and Perfect 2nds will be disallowed when you choose OK.

Key signatures can be changed if all staves are selected. The previous key signature will not be restored at the end of the selection.

Updated 29 November 2012. To avoid possible trashing some notes, the plugin will now only work if there is a passage (box) selection.

Updated 30 June 2021. Version 01.10.00. Restructured the code so it could be called by other plugins (such as cmdutils) without bringing up the dialog.

Plug-in written by Bob Zawalich.

Dotted Minim Rests

Added 18 Oct 2012 (last updated 08 Jan 2018)

For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

Dotted Minim Rests only operates in 12/8, looking for any sequence of rests on the first or third beats of the bar and turning them into a single dotted minim rest. The plug-in will thus convert two dotted crotchet rests into a single dotted minim rest, a convention that some people prefer.

Plug-in written by Michael Eastwood.

Add Interval

Version 01.18.03
Added 14 Feb 2013 (last updated 07 May 2021)

For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

Add an interval above or below selected notes. Describe intervals using a fixed number of semitones, or add named intervals to the selection. This is similar to the Sibelius Interval Above/Below, except that Sibelius allows only diatonic intervals to be added.

The plugin remembers its settings and can be invoked without its dialog. Other plugins call call into it to produce a specific interval. Plugins that do this can be assigned a separate shortcut. Two sample plugins that generate up and down diatonic tenths can be found at Add Interval Diatonic 10th in the category Notes and Rests. These plugins require Add Interval to be installed, and can be used as templates for plugins for other intervals.

Updated 13 July 2017. Support added for magnetic glisses in Sib 8.6 and later.

Updated 24 April 2021. Support for Run Plugin Hide Dialog added.

Updated 25 April 2021. Version 01.18.00.

Fixes for obscure bugs, better support for outside calling plugins, more Note properties retained.

Updated 26 April 2021. Version 01.18.01. Removed debug traces.

Updated 3 May 2021. Version 01.18.02. Minor redraw change.

Updated 7 May 2021. Version 01.18.03. Reinstated warning when there is no selection and dialog comes up.

Plug-in written by Bob Zawalich.

Add Interval Diatonic 10th

Version 01.15.00
Added 14 Feb 2013 (last updated 07 Mar 2014)

For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

This is a pair of plugins, one for adding a diatonic 10th above the top selected note, and one for adding a diatonic 10th below the bottom selected note.

This is similar to the Sibelius Interval Above/Below which does not provide 10ths.

This plugin calls the Add Interval plugin, which must be installed (available for installation from the Notes and Rests category). If you would like plugins for other intervals, these would serve well as templates.

I would expect that these plugins could be assigned a shortcut, such as the usually unused 0/shift-0 keys.

Plug-in written by Bob Zawalich.

Remove Duplicate Pitches

Version 01.10.00
Added 05 May 2013 (last updated 29 May 2018)

For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

Removes duplicated notes in a selection. It is similar to the shipping plugin Remove Unison Notes, except that it will also process notes in tuplets. Its main intention is for cleaning up piano reductions in large scores.

The plugin processes a selection in two passes. The first looks only at chords in a single voice in a single bar, and it removes duplicate notes from those chords. Duplicate notes must have the same pitch and note spelling. The plugin treats notes with special noteheads, tied notes, and quartertones separately, so it will remove a quartertone, for example, only if there are multiple quartertones with the same pitch.

On the second pass, it looks at chords at the same position in a bar across all staves and voices. Again, the pitch and note spelling must be the same, and quartertones and special noteheads are dealt with separately. Notes are only considered duplicates in this pass if the starting position and duration are the same. It will not delete overlapping notes that start or end at a different time.

In the second pass, tied notes will be deleted if there are other tied notes with the same properties at the same location and duration.

This plugin is somewhat more cautious about removing notes than Remove Unison Notes. If there are still too many, you might try running that plugin as well.

Updated 28 May 2018. Bug fixes and speed up in dictionary code.

Plug-in written by Bob Zawalich.

Merge To Voice 1

Version 01.08.00
Added 04 Sep 2013 (last updated 07 Mar 2014)

For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

This plugin converts notes in selected bars to be in voice 1. Just selecting the notes and choosing 1 on the keypad does this, but not very well, so the plugin automates these steps, which tends to do a better job:

1. Filter and delete rests in voices other than voice 1.

2. Remove tuplets and any notes contained in tuplets from the selection (since tuplets do not merge when the voice is changed, but rather overwrite). Other objects like slurs and text that start within the range of a tuplet in the same voice are also removed.

3. Change the voice of other bar objects to voice 1.

4. Delete any duplicated text, symbols, or lines (such as slurs) that might result.

Plug-in written by Bob Zawalich.

Hide Articulations

Version 01.08.00
Added 17 Feb 2014 (last updated 18 Mar 2022)

For use with Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

****This plugin hides articulations in selected notes or chords, while retaining the playback of the articulations. This automates what some users have been doing by hand. It creates hidden, sounding notes with articulations in another voice, then silences and removes articulations from the original note or chord.**** ****The plugin requires that there be an unused voice for each voice in a bar that contains selected notes or chords with articulations. It will hide any rests in any voices it adds note into. It can replace at most 2 voices in any bar. If there are more than 2 voices with articulations in a bar, that bar is skipped.**** ****Please remember that you did this later, as it could be tricky to figure out what is going on. There is no easy way to undo this after Undo is out of range, so be sure this is what you want to do.**** ****Updated 25 Feb 2014. Had found a problem that when the notes to be hidden had visible accidentals, the accidentals were usually, but not always hidden in the result. The code was changed to change any visible accidentals to be cautionary so they would remain visible. Be careful pasting such notes to different locations as the visible accidental may be inappropriate.**** **** Since check for accidental visibility was only available in Sib 7.1.3, that is now the earliest version this plugin can run under.**** ****Updated 18 March 2022. Version 01.08.00. Skip notes in tuplets and notes or chords with quartertones, since they were not being handled correctly.****

Plug-in written by Bob Zawalich.

Dangling Ties To Slurs

Version 01.05.00
Added 29 May 2014 (last updated 17 Jun 2015)

For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

This plugin replaces dangling ties with slurs, for use in scores where someone has mistakenly entered slurs as ties. It cannot replace the ties with slurs at the same location with the same length, which is what is desired.

Instead, it automates this process, for each note with a dangling tie:

* remove the tie

* add a slur to the note, as if the note were selected and you typed "s".

There are issues and compromises here. If the ties had been dragged, the duration will not be maintained. All slurs extend only for the duration of the initiating note. Slurs added to chords will go to the top and bottom of the entire chord, not at the note location. It works pretty well for single notes slurred to the following note.

Ties are considered to be dangling if the following note or chord in the same voice does not have a note of the same pitch as the previous note with a tie. Cross-voice ties are not processed correctly.

Using this plugin is a bit like having a drug with side effects. It will most likely not give you a finished result, but if you have this situation, it should speed up the process of fixing it. Use only as directed, and keep a copy of the original score to help set the slur lengths.

Plug-in written by Bob Zawalich.

Paste Rhythm to Pitches

Version 3.2
Added 11 Aug 2014 (last updated 12 May 2018)

For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

Paste Rhythm to Pitches

Version 2.1

For Sibelius versions 6 to 8.

This plugin superimposes a rhythm of the notes on the clipboard on to a selected passage of music.

To use it:

  1. Select the rhythm to be pasted and copy it to the clipboard.
  2. Select the passage containing the pitches to paste the rhythm to.
  3. Run the plugin

Options

Paste the rhythm from voice

If the clipboard contains more than one voice, hence more than one rhythm, then the rhythm to be pasted can be selected.

Rhythm (source)

These options allow the rhythm to be pasted to pitches of the rhythm voice only (leaving the pitches in the other voices unaffected), the pitches of all voices as separate voices or the pitches of all voices as the rhythm voice. I suggest trying these out since it is much easier to convey these visually than verbally.

Pitches (destination)

This governs which pitches are used when new rhythm does not exactly coincide with them. The best option will depend on the musical context.

Text and Dynamics (source)

Since lyrics, dynamics and some other objects are often linked with rhythm, there are options to paste these also. Note that if these options are ticked they will replace the corresponding objects in the selection of pitches.

If �Paste from the rhythm voice only� is selected then only text, dynamics etc present in the rhythm voice are pasted.

Notes

If the selected rhythm on the clipboard and selected pitches differ in length, the shorter of the two always applies.

If more than one staff is copied to the clipboard only the top staff is used. The top notes of the rhythm voice are used to determine the rhythm (where ties are involved etc), the type of notehead used and other note properties.

The plugin only works for selections of 126 crotchet beats or less. This is for technical reasons, i.e. it makes it much easier to write!

There is a bug in the manuscript language which means that the direction of note stems can be wrong when combining grace notes, tuplets and multiple voices.

Added in version 3.1

This fixes a bug where pasted notes could disappear if Paste Note Pattern was selected and the pattern contained one note.

Added in version 3

Paste Note Pattern

This option allows both the rhythm and the Note Pattern (up and down movement of the notes) to be pasted. It allows the plugin to be used as an arpeggiator by creating one bar of the broken chord/arpeggio pattern, copying it to the clipboard, selecting some bars containing block chords then running the plugin with the option selected.

Demonstration Videos

Four short videos demonstrating the basic use of this plugin and some of the options have been posted here.

  • https://youtu.be/PQjlQKL_ppw
  • https://youtu.be/uBL36-SzDio
  • https://youtu.be/8v51zmSpsPk
  • https://youtu.be/NcuAxjZNE3o
Dialog

The wording of some parts of the dialog has been changed to make it more user friendly.

Bugs

A number of bug fixes have been added, in particular one that affected selections beginning with rests.

Added in version 2.1

Bug fix added to prevent the bar after the selection being affected when more than one stave is selected.

Added in version 2

Multipaste

When this option is checked the rhythm will repeated as many times as the selection will allow. (This can also be used for multiple copying of lyrics, dynamics, articulations and slurs on to passages which have the same rhythm as the clipboard.)

Offset

If �Use the pitches before the rhythm notes� is selected, this will use the pitches after the rhythm note when it is the specified number of beats from it. If �Use the pitches after the rhythm notes� is selected then it will use the pitches before the rhythm note for the specified number of beats. This is much easier to visualise than describe, so I suggest copying eight quavers (eighth notes) to the clipboard, and using the plugin to paste it over two minims (half notes) with different pitches. Trying out the options, with the offset switched off at first and then set to various numbers of quavers should clarify this function.

This option is particularly useful in for pasting Jazz/Pop type rhythms which often anticipate a beat by a quaver or semiquaver. Although large values are available the smaller ones are generally more useful.

Updated 12 May 2018 Version 3.2. Coloured notes are supported in Sibelius 8.3 and higher, Slide Styles are supported from Sibelius 8.6 and higher.

Plug-in written by Kenneth Gaw.

Add Chord Notes Below Melody

Version 1.2
Added 11 Aug 2014 (last updated 12 May 2018)

For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

This plug-in adds chord notes below a melodic line. It is designed to fill out a melodic line that already has an accompaniment.

To use it, select some notes and make sure some chord symbols are present in the same bars though not necessarily in the selected stave(s).

When run, the plug-in will add two or three chord notes below the melody line.

Updated 12 May 2018. Slide Styles supported in Sibelius 8.6 and higher.

The �Stave containing the chords� option defaults to the lowest stave that has chords symbols. This can be altered here if desired.

The �Passing Notes� allows the user to double passing notes (non-chord melody notes) a 3rd or a 6th below. The best option depends on the musical context and some alterations to the plug-in�s output may have to be made.

With the �Omit Root� option the user can miss out the root from the added notes. This often sounds better in complicated chords and assumes that a bass part is present elsewhere.

Please note:
  • If a change of key-signature occurs in the middle of a bar then the doubled passing notes may be incorrect until the beginning of the next one.
  • Chord notes are only added to single notes. If a stem contains more than one notehead no chord notes are added.

Updated 12 May 2018. Slide Styles supported in Sibelius 8.6 and higher.

Plug-in written by Kenneth Gaw.

Adjust Stem Lengths

Version 01.07.00
Added 24 Sep 2014 (last updated 19 Apr 2021)

For use with Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

Adjust the stem lengths of selected notes by adding an offset (in units of spaces) to the current or default Stem length of these notes. Unlike the Inspector, a positive value increases the stem length, and a negative value decreases it, regardless of stem direction.

Setting the default length to 0 will reset the length to the default length.

Updated 19 April 2021. Added ability to hide dialog.

Plug-in written by Bob Zawalich.

Scale Notehead Sizes

Version 01.60.00
Added 03 Mar 2015 (last updated 20 Jan 2016)

For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

This plugin changes selected notes to be a scaled version of the normal size. It does this by copying data from a file called the data score. This inserts an appropriate Notehead style into the active score and applies it to the selection.

You may see the data score open before the dialog box comes up. Please do not delete or modify the data score, as that will most likely cause the plugin to stop working. If it remains open at the end of the plugin, please close it without saving changes.

You can choose a different data score (if you have created one) using the More Noteheads button.

Updated 4 March 2015 to change the distribution of files to work better with the Sibelius 7 plugin installer.

Updated 19 January 2016. Added 45% size (cue grace) and 3 new stemless sizes. Code reworked and PDF updated for easier modification in the future.

Plug-in written by Bob Zawalich.

Delete top/bottom notes

Version 1.0
Added 18 Feb 2016 (last updated )

For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

Delete Top/Bottom Notes

For use with Sibelius 6, Sibelius 7, Sibelius 7.5 and 8

Version 1.0

These are a pair of workflow plugins designed to speed up the removal of the top/bottom notes of a chord if it contains more than one note. They are intended to be assigned to appropriate keyboard shortcuts. (Alt+[ and Alt+] are possible ones.)

To remove all notes either press the Delete key or download the Delete Voice plugins for voice specific removal.

Plug-in written by Kenneth Gaw.

Dot Undot Rhythm

Version 01.50.00
Added 18 Apr 2016 (last updated 10 Jul 2017)

For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

Given a passage selection, the plugin determines that certain adjacent notes are pairs. If the pairs have the same duration, the plugin will dot the first note and divide the duration of the second note in half. If the notes are a dotted pair, it will make the notes the same duration, thus undotting the pair.

There are some restrictions. Do not run the plugin if your selection contains cross staff beamed notes, because the plugin cannot detect them and if they are changed the notes will lose their cross staff beamed property. (The same limitation is true for any plugin. A plugin can neither detect nor create cross staff beamed notes).

The plugin processes a bar at a time and it will skip any bars that contain tuplets, grace notes, quartertones or double tremolos.

There is no dialog. Just make a selection and run the plugin.

This plugin was inspired by, and is dedicated to, Daniel Spreadbury

Updated 19 April 2016. Rewritten to not use the Divide Durations plugin. You will only need to install this plugin to make it work.

Updated 26 April 2016. Added settings accessible when running the plugin with no selection. Settings allow you to toggle dotted state, change undotted to dotted only or change dotted to undotted only. The settings are in effect only for the current Sibelius session.

Updated 30 April 2016. Bug fix for odd positions plus Scotch snap option and show dialog option.

Updated 4 May 2016. Options are now saved across Sibelius sessions and there are new options that will dot/undot if you select a single note at any position in a bar.(Thanks to Bernie Cossentino for the ideas to do that!)

Updated 10 July 2017. Support added for magnetic glisses in Sib 8.6 and later.

Plug-in written by Bob Zawalich.

Beamed Note Groups

Version 01.07.00
Added 18 Jul 2016 (last updated 28 Jun 2021)

For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

Makes selected notes (8th notes and smaller) into a beamed group. It interrupts the groups at rests, barlines, long notes, or tuplets.

It skips notes under tuplets and notes with feathered beams.

The plugin cannot set the ends of groups to stop at rests. When the plugin concludes, the rests will be selected. Without changing the selection, go to keypad layout 3 and click the No Beam button.

Updated 27 December 2019. Version 01.06.00. Added options to beam in tuplets and across barlines and rests. The plugin will usually be able to beam across deleted rests, which is not usually allowed. These new features will not always work, for unknown reasons, but they are probably worth trying if you cannot get beaming to work.

Updated 28 June 2021. Version 01.07.00. For Ultimate 2021.2 or later, the plugin will apply the No Beam command to the selected rests at the end of the plugin if Beam Over Rests is unchecked. This will cause the beam of the last note before the rest to be effectively an End Beam, which the plugin was previously unable to do. This provides more consistent results than using the End Beam command on the last note in the group.

Plug-in written by Bob Zawalich.

Create N by M Tuplet

Version 01.56.00
Added 05 Oct 2016 (last updated 24 Jun 2019)

For use with Sibelius 5, Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

Creates a tuplet with a specified ratio from the first selected note or rest. You can choose any positive integer values for N and M, and a wider range of values is allowed compared to creating a tuplet in Sibelius.

Updated 26 June 2018 to add a Do Not Show Dialog checkbox.

Updated 31 May 2019 by Bob Zawalich. Version 01.53.00. This plugin now stores its dialog settings in Preferences so it retains them across Sibelius sessions. Also added version to title bar.

Updated 24 June 2019. Version 01.56.00. Changed processing when there is no selection; also added controls to allow choice of bracket and number properties similar to what is available in Create Tuplet.

Plug-in written by Hans-Christoph Wirth.

Ties Into Second Ending

Version 01.25.00
Added 14 Jun 2018 (last updated 29 Mar 2020)

For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

This plugin fakes ties into a second or later ending by turning a note into a tuplet with a hidden short first note tied to a note that appears to be the original duration. The first note and the triplet brackets are hidden, so it appears as if the visible note is tied from nothing. The note that starts the tie is given the notehead style HeadlessStemlessSilent, which the plugin will derive from its associated data file if it is not defined in the score.

The data file is included in the zip file, and the installer will copy it into the same folder where the plugin is installed.

At the end, the visible note(s) will be selected. To adjust the tie length use Shift+Alt/Option+Right to change the bar width. You can also adjust the horizontal position of the invisible note. Do not Reset Note Spacing on the bars with added ties.

Updated 17 August 2017. Rebuilt with slightly different tuplet mechanism so tied notes are offset less that before. You will still need to make horizontal adjustments by hand. See the PDF file at http://www.bobzawalich.com/wp-content/uploads/2018/08/The-Ties-Into-Second-Ending-plugin.pdf for more details.

Updated 8 November 2019. Version 01.20.00. This is a completely different implementation, using grace notes for hidden notes rather than tuplets. (Thanks to Samuel Wilson for suggesting this). Grace notes let the main notes align with similar notes in other staves, and this requires less manual adjustment.

You may still not like the wider gap at the start of the bar, and suggestions for reducing the size are given in the Help... button in the plugin, and in the PDF file noted above.

As before, there is a data file included in the zip file, which will be installed in the same folder as the plugin. It provides a source for the special notehead styles needed by the plugin.

Updated 15 January 2020 - Version 01.25.00. Changed to use a playable grace note, which often makes playback work better than it did before. In some cases playback of the tied-into notes does not work, and there are new options to silence the grace note or the visible note, or both, using Play on Pass settings.

Zip file updated 29 March 2020. The data file was not included in the previous update, and it is now present. No code changes and version number is not updated.

Plug-in written by Bob Zawalich.

Tie Extended Stable

Version 01.07.00
Added 14 Aug 2018 (last updated )

For use with Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

This plugin processes pairs of selected notes. You can either multiple select exactly 2 notes, or make a passage selection that includes tied notes. Each pair of notes processed must have the same pitch and be in the same or adjacent bars and further apart than the duration of the first note. If there are voices available, the plugin will untie and silence the first note, and add a tied note in another voice whose duration will reach the tie to the second note.

The plugin will open a data file, HiddenNoteheadStyles_v6.dat, that contains a notehead style called StemlessAllQuarters, which is stemless and uses the black quarter note notehead for notes of all durations. If that cannot be found the plugin will use the notehead style Stemless, which will work most of the time. The plugin installer will copy this file to the same folder as the plugin. If you are installing the plugin manually you will need to install it with the plugin file. If the plugin opens the data file and asks you to save changes, say Yes. It should only happen once, but don't make changes to the data file yourself.

The plugin will hide rests in any voices it generates.

If there are not enough voices available to add more notes, no more changes will be made in that bar. At most 3 notes can be added to a single bar, since there are only 4 voices.

Plug-in written by Bob Zawalich.

Replace Ties With Slurs

Version 01.11.00
Added 16 Aug 2018 (last updated )

For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

Processes notes in a selection and adds slurs to the processed notes. If the processed notes were tied, the plugin removes the ties.

The intended usage is to use slurs to simulate dotted or dashed ties.

If no adjustments are made, the slurs are added as Sibelius adds them. Their duration is the length of the note to which they are added. They will be placed at the top or bottom of a chord. The plugin can also try to place the slurs close to the notes that had the ties. This is tricky to do. Magnetic Layout is turned off for these slurs. Such added slurs will need to be flipped manually in chords.

This is a blunt instrument. I suggest making a copy of the score with ties so you can compare the results at the end.

Plug-in written by Bob Zawalich.

Fill With Tied Notes

Version 01.30.70
Added 17 Sep 2019 (last updated 22 Sep 2019)

For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

Fill With Tied Notes fills the bars between the first selected note or chord in a staff and either a second selected note,or the end of the selection,with tied copies of the first selected note, using the pitches, voice,and notehead styles of the first notes.

The added notes will have durations appropriate to the time signature of the enclosing bars. It can be especially useful when there are many time signature changes.

Updated 22 September 2019. Version 01.30.70. Fixed a bug where an unintended warning appeared if there was a stopper note at the start of a bar following the bars being filled.

Plug-in written by Bob Zawalich.

Create Trailing Pseudo-Grace Notes

Version 01.06.00
Added 30 Oct 2019 (last updated 06 Dec 2023)

For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

__This plugin will add "pseudo-grace notes" following a selected note or chord, using the procedure described in https://www.scoringnotes.com/tips/grace-notes-at-the-end-of-a-bar-in-sibelius/. __Specify the number and duration of the grace notes and a notehead style and size, and the plugin will create a tuplet containing the original note plus trailing "grace notes" with the same pitch as the original note. The new notes will not be grace-note sized. See the Scoring Notes post or the Note sizing button for details about note sizing. __The first new note will be selected so you can easily use Re-input pitches to get correct pitches. __Updated 21Feb2020.Version 01.50.01. Small dialog layout tweaks. __Updated 6 December 2023. Version 01.06.00. Added bracketing and silencing of notes and some bug fixes.

Plug-in written by Bob Zawalich.

Flip Selected Notes

Version 01.12.40
Added 28 Apr 2020 (last updated 03 Mar 2024)

For use with Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

__ Initial version 01.07.02. __Change stem directions of selected notes or beamed groups of notes, from individually selected notes or groups of beamed notes. It will not flip cross-staff beamed notes or grace notes. __It requires Sibelius 7 or later. __It is especially useful when flipping beamed note groups when some notes are flipped already, and flipping specific notes has no effect. You can select any note in a note group, and the plugin will always flip the entire beam group. __It can also reset the flip state of all selected note, and make selected notes all point up or point down. __Updated 30 April 2020. Version 01.07.03. The zip file includes a copy of Flip Selected Notes called Flip Selected Notes No Dialog, which will run by default without a dialog, with the option set to Flip notes. If you run the dialog with no selection you can still bring up the dialog and changes settings. The plugin installer will install both plugins in the same folder. __Updated 15 May 2020. Version 01.07.04. Fixes crashing bug in the 01.07.03 version that uses the dialog. Everyone who uses this plugin should update it. __Updated 19 April 2021. Enhanced Do Not Show Dialog support. __Updated 3 May 2021. Version 01.09.00. Fixed bug where the top staff would not be processed if there was a system selection. __Updated 06 August 2021. Version 01.10.00. Restructured so it could be called by the RunPluginEntry_cu command in Execute Commands. Redid the dialog to replace radio buttons with a list box, and added a Trace Macro button. __Updated 16 August 2021. Version 01.11.00. Previous change broke plugin when single notes were selected. Now fixed. __Updated 17 October 2022. Version 01.12.00. Major code restructuring to allow plugin to be called by RunPluginEntry_cu. Added New Macro/Plugin button to generate and store RunPluginEntry_cu command lines. __Updated 24 July 2023. Version 01.12.10. Changed call to utils.IsPluginFileAvailable which did not exist, to call Rethythm.IsPluginFileAvailable, which exists in an accessible shipping plugin. __Updated 02 March 2024. Version 01.12.40. Updated to support New Plugin button. Needs updated Execute Commands, cmdutils, and New Plugin Lib.

Plug-in written by Bob Zawalich.

Toggle True LV Ties

Version 01.05.00
Added 08 Jun 2020 (last updated 08 Jun 2020)

For use with Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

First version 01.05.00. Requires Sibelius Ultimate 2020.3 or later.

Will toggle LV Ties on or off in a single step. If an untied note is selected, the plugin will add an LV tie to it. If a note with an LV Tie is selected, it will remove the tie and its LV state.

If it encounters a normal tied note, it does nothing. It was tricky deciding what to do it this case, turning it into an LV tie is possible, but so is removing the tie, so I decided that avoiding possibly removing data unintentionally was probably best.

Assign to a shortcut for single key action.

Plug-in written by Bob Zawalich.

Drum Cues

Version 01.11.00
Added 21 Mar 2021 (last updated 28 Mar 2021)

For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

Starting with a passage selection of notes in voice 1, the plugin will change the notes to a single pitch, either above the top staff line or below the bottom staff line, then add one slash note per beat in a different voice.

All the resulting notes and slashes will be silenced.

It will run in Sibelius 6.2 or later, but if you use the Cues Below option prior to Sibelius 2021.2, the voices will be reversed. As soon as the plugin ends use ''Swap Voices 1 and 2'' (shift+V) to correct the voices.

It calls the plugin Fill Selection With Slashes, in category Notes and Rests, to add the slash notes, so you will need to install that plugin as well, if you do not have it installed already.

Updated 29 March 2021. Version 01.11.00.

Fairly subtle changes made for advanced users. You can now choose to leave the cue notes playable, and to change the notehead style of either the cue notes or slash notes to be any style defined in your score, including custom notehead styles. There are additional options for how the slash notes are produced.

Dialog settings are now saved across Sibelius sessions.

If you use the default settings, the results will be the same as the previous version.

This plugin requires the plugin Fill Selection With Slash Notes version 01.25.00 or later to be installed.

Plug-in written by Bob Zawalich.

Add Cue Notes

Version 01.31.10
Added 07 Apr 2023 (last updated 25 Apr 2024)

For use with Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

__Streamlines the process of adding cue notes for large scores. In many cases, selecting and copying notes, then selecting a target staff and running Paste As Cue will accomplish the same result without needing a plugin. __Make a passage selection of the desired bars in the staff or staves that will receive the cue notes. __Run the plugin to select the staff that provides the cue notes. __ On OK, the cue notes will be added using Paste As Cue. __There are options to show only visible staves for the cue notes, and to paste cues only into visible staves. __Add Cue Notes calls the installable plugin Deselect Hidden Staves to determine when staves are visible. The most recent version of that plugin must be installed to use this feature. If the plugin is not installed, the checkboxes will be grayed out. __A link to the document Using the Add Cue Notes Plugin can be found in the Help dialog. __This plugin was designed and cowritten by Ilkay Bora Oder. __Updated 25 April 2024. Version 01.31.10. Added descriptions of using the Paste As Cue Preferences to control the octave of cues.

Plug-in written by Bob Zawalich and Ilkay Bora Oder.

Replace Notehead Style

Version 01.10.60
Added 19 Aug 2023 (last updated 28 Jun 2024)

For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

__Replace Notehead Style lets you filter all the notes with given styles, or replace notehead styles with another notehead style. It can serve as the equivalent of Notations-Noteheads-Type, but it was intended to let you make invisible noteheads visible by changing the notehead style. __There are options to allow you to replace hidden notes or rests with invisible notes. The Help dialog offers instructions, and a PDF tutorial is available. __The data score Invisible and Show Invisible Noteheads Styles is included in the zip file. It defines special notehead styles to make notes invisible or visible and contains notes with these styles. Copying the notes to your score will transfer the notehead definitions. The plugin installer will place it in the user Manuscript Paper For Plug-ins subfolder, and you can use File New to open the data score for copying. __Updated 03 March 2024. Version 01.10.30. Updated to support New Plugin button. Needs updated Execute Commands, cmdutils, and New Plugin Lib. __Updated 25 March 2024. Version 01.10.60. Removed obsolete code in New Plugin... code in validating outside callers. No change for normal use of plugin.

Plug-in written by Bob Zawalich.

Categories