Selection Inverter

Version 01.06.00
Added 18 Dec 2011 (last updated 07 Mar 2014)

For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

Inverts the contents of the bars in the score that contain selected objects.

Previously unselected bars will not be affected.

Plug-in written by Bob Zawalich.

Select All Following

Version 01.09.00
Added 18 Dec 2011 (last updated 07 Mar 2014)

For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

Makes a system (double purple box) selection of all the bars following the last bar in the current selection. This could be useful for deleting to the end of the score.

Updated 21 December 2011. Added ability to select regular passage as well as system passage, and to include the unselected end of the previously selected final bar in the new selection.

Plug-in written by Bob Zawalich.

Select Staves

Version 01.30.00
Added 25 Mar 2015 (last updated 16 Apr 2023)

For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

__Lists the names of all the staves in the score. __Click on a staff name in the list box to check or uncheck it. Checked staff names will be selected when the plugin ends.There is no keyboard access to the list, so you will have to use a mouse. __This can make selecting staves in a large score easier, since less scrolling will be required, and can be useful if you are going to use Focus On Staves. __Updated 22 February 2018. Change Select Staves to use a conventional multi-selectable list box, which allows forkeyboard selection, in Sibelius 7.1.3 and later. For Sibelius 6, the original plugin, which uses a special checkbox-style listbox that can only be used with a mouse, is also available and is now called Select Staves for Sibelius 6. __Updated 22 February 2023. Version 01.28.00. There is now a choice to select all bars or, if there is a passage selection, to take the range of bars from the selection. This can be used to extend a selection vertically when many of the staves are offscreen. If there is a passage selection, any staves in the selection will be chosen when the dialog comes up, but you must specify every staff you want in the resulting selection, so if you want the originally selected staves to be included be sure they remain chosen in the list box. __ The �Bars in passage selection� radio button is the default option if there is a passage selection. If there is no passage selection only �All bars� will be available. __ The partner plugin Select Staves for Sibelius 6 has not been updated. __Updated 3 April 2023. Version 01.29.01. Added option to skip hidden staves in the selection. This feature requires the most recent version of the plugin Deselect Hidden Staves. __ The partner plugin Select Staves for Sibelius 6 has not been updated. __Updated 15 April 2023. Version 01.30.00. Added option to show only visible staves in the list box. This feature requires the most recent version of the plugin Deselect Hidden Staves. __ The partner plugin Select Staves for Sibelius 6 has not been updated.

Plug-in written by Bob Zawalich.

Save or Restore Selection

Version 01.11.00
Added 16 Jul 2018 (last updated 29 Mar 2021)

For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

Save the current selection or restore a saved one from the same score.

If there is a valid saved selection, it will be restored if the plugin is run without a displayed dialog. Run the plugin on a different score to get the dialog back.

Updated 29 March 2021.The zip file now includes 2 helper plugins, Save Selection and Restore Selection, which never bring up a plugin. Save Or Restore Selection must be must be installed for Save Selection or Restore Selection to work.

The helper plugins should be useful when used in sequences of Command in Sib 2021.2 or later.

Plug-in written by Bob Zawalich.

Retract Selection

Version 01.05.00
Added 02 Sep 2019 (last updated 02 Sep 2019)

For use with Sibelius 5, Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

A passage (blue box) selection or system passage (purple box)selection, is considered full selected if the last bar was selected by clicking in the bar rather than on a note. When adding lines to such a selection, the lines will often extend into the following bar. This plugin move the end of such a selection to end end of the previous bar so lines will end where you expect them to.

Plug-in written by Bob Zawalich.

System Passage To Passage Selection

Version 01.05.00
Added 26 Apr 2020 (last updated )

For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

Converts a System Passage selection (purple box) to a staff passage selection (blue box) covering the same bars. Kind of the reverse of Home-Select-System Passage.

Plug-in written by Bob Zawalich.

Select Passage All

Version 01.06.00
Added 14 Jun 2020 (last updated 19 Jul 2020)

For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

Added 14 June 2020. Original Version 01.06.00.

Makes a passage - blue box- selection of the entire score. Comparable to doing Select All but with a normal passage selection rather than a System Passage selection.

Plug-in written by Bob Zawalich.

Replace From Clipboard

Version 01.06.00
Added 05 Sep 2022 (last updated 06 Sep 2022)

For use with Sibelius 6, Sibelius 7.1, Sibelius 7.5, Sibelius 8.x, Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

In Sibelius, if you have a single object selected with a non-passage selection, and then paste a copied object, the original object will still be in the score, along with the pasted object. Sometimes this is not what you want. This plugin *replaces EACH * selected object with the contents of the clipboard. You will be warned if there is nothing in the clipboard. It will only work if the copied data to be pasted is a single Sibelius Bar Object, such as Text or a Line. The selection of objects to replace cannot be a passage selection. Be very aware that the paste will replace ALL selected objects, so be sure you want all such objects replaced. The horizontal and vertical position of the pasted objects is taken from the original objects. The pasted objects will be selected when the plugin completes. If the plugin is run with no selection, an informational dialog will come up. Initial version 01.06.00 4 September 2022.

Plug-in written by Bob Zawalich.

Select Barline After Last Selected Object

Version 01.07.20
Added 07 Dec 2023 (last updated 12 Jan 2024)

For use with Sibelius 18.x, Sibelius 19.x, Sibelius 20.x, Sibelius 21.x, Sibelius 22.x, Sibelius 23.x and Sibelius 24.x

__Select Barline After Last Selected Object and its companion plugin Select Barline Before First Selected Object are included in the same zip file, and both will be installed when you install Select Barline After Last Selected Object. __These plugins select either the default barline or the Special Barline after the last selected object or before the first selected object. __They are intended to make it easier to select a barline by selecting a bar or any object in a bar and running the plugin, rather than having to click on the barline itself. __You must also install the most current version of the plugin cmdutils in category Engravers Tools to use these plugins. __These plugins are dedicated to Ilkay Bora Oder. __Updated 20 December 2023. Version 01.07.10. Select Barline Before First Selected Object will now select the initial barline at the start of the first bar if there is no Start Repeat barline in Bar 1. If there is a special barline at the start of bar 1, the plugin will stop there. In that case use Select Initial Barline to get the initial barline. __Updated 21 December 2023. Version 01.07.11. Fixed typo that caused crash. __Updated 12 January 2024. Version 01.07.20. Corrected filename of Select Barline Before First Selected Object to remove trailing blank. No code changes.

Plug-in written by Bob Zawalich.

Categories